Woodworking in America 2008 #9: WIA: Part 2 of 3 - Forgotten Workbenches and Workholding

  • Advertise with us
Blog entry by Al Navas posted 12-12-2008 03:13 AM 1557 reads 1 time favorited 1 comment Add to Favorites Watch
« Part 8: WIA: Part 1 of 3 - Forgotten Workbenches and Workholding Part 9 of Woodworking in America 2008 series Part 10: WIA: Part 3 of 3 - Forgotten Workbenches and Workholding »

From my blog:

In this video episode Christopher Schwarz, Editor of Popular Woodworking and Woodworking Magazine, presents, discusses, and points out pros and cons of several benches and their features:

1. The European bench: He is not happy with this form, but also is not anti-European-form. His problem with this one: People take old principles and apply them to other benches. He likes to apply the kitchen door test (typical sizes we work on) and the kitchen carcase test (pushes him to narrower benches) to all benches, for suitability. 2. Materials: For example, the Nicholson bench required only a small amount of material. He likes soft woods for his benches; SYP (Southern yellow pine) does not move much, is stiff ((no flexing), it dents (no detriment), and he can flatten a workbench in 45 minutes using a #8 jointer hand plane diagonally. Also, SYP does not sag; however, one of his benches has developed a low spot i.n the middle. He believes the critical area that requires total flatness on a bench top is the front 8 inches to 10 inches. 3. Roman style bench: This is the one he finds in most pro shops. Pros: It is simple, and stout. Con: No planing stops, etc. 4. The French undercarriage: Pros: Great clamping ability. Con: Requires a log of material, primarily due to its massive legs. 5. The English bench: Pros: Requires very little wood. Con: Undercarriage clamping is tough. 6. The Danish bench: Pro: Easy to knock down. Don: Can’t clamp easily on the front. 7. The Shaker bench: Pros: Great looks, and storage for everything and everybody. Cons: Hard to clamp on. 8. Tool trays: Cons: They are always full of “stuff”. 9. The Hayward bench: The thin top flexes; but the front apron takes away some of the flex.
10. Top thickness: At 3″ to 4″, the beam strength is enough to provide support on the legs. Holdfasts reach their holding limit around 4 inches.
11. Bench height: For hand planing, it should hit the joint between the pinkie and the palm of the hand.
12. Bench width: Finds that 22″ is great, but 18″ tends to be tippy.
13. Bench finish: NO slick film. The formula he uses is 50/50 BLO (boiled linseed oil) / varnish, with solvent added to make it possible to wipe on the mixture. There is no need to finish the underside, unless the owner wants to finish it.

Next: The ending of the session on Forgotten Workbenches and Workholding.


Related posts: Watch more videos from Woodworking in America on my blog.

The following is a screen shot from the video:

-- Al Navas, Country Club, MO,

1 comment so far

View Mark Shymanski's profile

Mark Shymanski

5621 posts in 3736 days

#1 posted 01-10-2009 10:45 PM

Thanks for the post.

-- "Checking for square? What madness is this! The cabinet is square because I will it to be so!" Jeremy Greiner LJ Topic#20953 2011 Feb 2

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics