LumberJocks

AfraidKnot's Blog

  • Advertise with us
This blog is written by AfraidKnot | 1 entry so far

Latest Entry

Ridgid R4512 router table installation

08-16-2015 06:14 PM by AfraidKnot | 0 comments »

I have been wanting to install my router table on my Ridgid R4512 table saw, and finally came up with an idea to easily mount it and easily keep it level using a hanger system. First I bought 3 sticks of angle aluminum 1/8”x1”x36”, and cut them down to about 31” and drilled holes on each end at 29 and 7/8” on center. Next I used 5/16”x5” tap bolts and put one nut on about 5/8”” from the head and on the other bolt the nut would just about go on all the way, but just loose enough to allow the bolt to slide in the track. I then sandwiched the angle aluminum between the nut and then a washer and another nut. Snug them up finger t...

Read this entry »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com