LumberJocks

72hw's Favorites

  • Advertise with us
View poroskywood's profile

Drunken Cutting Boards #1: Drunken Alice in Wonderland Cutting Board

1680 days ago by poroskywood | 39 comments »

Hey everybody, after a few personal messages here is my version of a how to on a Drunken Checker Board. I of coarse bow to the Chairman of the Board and pay tribute with beer. This is a Off-Checker pattern I call “Drunken Alice in Wonderland” The “serendipitous” nature of this piece is appealing in a far out sort of way. Here Goes… So first I prepare the Material. I am using Hard Maple and Walnut both are surfaced flat and cut 1” x 9” x 14&...

Read this entry »


View Boatman53's profile

Parallel jaw leg vise

651 days ago by Boatman53 | 17 comments »

For about a year now I’ve been trying to refine the detail of my parallel jaw leg vise and I think I’ve got all the kinks worked out. My son put together this video of the bench I built this past winter that uses the chain leg vise. I’m in the process of getting quotes for the parts so I can offer these for sale. I’ve been making all the parts myself up to this point and I’m not a cnc. Take a look at the video and I welcome comment and discussions. It can be ret...

Read this entry »


View knotscott's profile

The ABCs of Picking Saw Blades

1583 days ago by knotscott | 31 comments »

There are a number of different factors that should be considered in saw blade selection. Decent quality is essential or you’re sunk from the beginning. The saw’s end performance is largely determined by proper setup and blade selection. You don’t need to spend big bucks to get a good blade, but more expensive blades typically increase your chances of getting good quality. As with many things, there are often a variety of choices that each have merit, so consider what’...

Read this entry »


View rance's profile

Disposable KerfMaker

1038 days ago by rance | 31 comments »

Well, yes, the Kerf Maker is a very clever jig. I have a different take on its manufacture. I see a reason to have several, NO, Wait… Why not make them DISPOSABLE? :) I had a need to use one today so why not make one. Here it is:  I used a stick of about 1/2” square pine. Yeah, Pine(or is that Poplar?). And some double sided tape. Cut the stick in half. (I’m kinda protective of my tape. Can ya tell?)  Then stick both halves together with the tape. &n...

Read this entry »


View ~Julie~'s profile

Routed Out Serving Tray

507 days ago by ~Julie~ | 15 comments »

I decided to use some of my wood stock to make some trays. I started with a piece of wood that I needed help identifying and had help from fellow lumberjocks to do that. It turned out it was birch which I planed down and cut to the size of 25” long x 7 1/2” wide x 13/16” thick: For 3” at each end, on the underside of the piece, I routed out a depth of 5/16” using a bowl bit: (This was cleaned up afterwards with a sander.) Here you can see the profile ...

Read this entry »


View Hutch's profile

DIY Table Saw Fence #1: Table Saw Fence

2320 days ago by Hutch | 232 comments »

This is my old tablesaw fence. It is a little hard to see from the photo, but I cracked it trying to “micro-adjust” it. So I started to look for an aftermarket fence, of which there are some really nice ones out there. I just didn’t want to spend quite as much as they were asking because I have a previously owned Central Machinery tablesaw. I also was curious to see if I could come up with my own fence. I was worried about two things with most diy fence systems that...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase