49er's Blog

  • Advertise with us
This blog is written by 49er | 1 entry so far

Latest Entry

Getting Familiar With The Lock Miter

01-23-2014 03:57 PM by 49er | 13 comments »

I bought this Whiteside lock miter bit a couple weeks ago. This is my experience with it so far.The first thing I did was make a tall fence to go on my Jointech positioner. Next I made a couple of feather boards. Then I just eye balled the center of the bit to the center of my stock. And at the same time set the fence so the top edge of my stock would not be completely removed. If the fence is set to deep the complete edge will be removed. Resulting in snipe. Now I took my dial caliper and got the height perfect. This process took three measurements and some math. I was more accurate subtracting the shelf height from the total stock thickness. The Incra router lift made t...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics