LumberJocks

Router Table on the Cheap

  • Advertise with us
Blog series by 47phord updated 695 days ago 2 parts 2623 reads 7 comments total

Part 1: The Beginning...

711 days ago by 47phord | 3 comments »

Let me start this off by saying that I am not only a novice woodworker, but I am also a BROKE novice woodworker so…I scored this crappy old particle board cabinet for free at a garage sale. I have been wanting a router table for a while now, but haven’t been able to part with the green and this cabinet is the perfect size. As you can see, it is kinda sad: Flimsy would be the best way to describe it. I started off by making a bottom out of some old 3/4” CDX plywood ...

Read this entry »


Part 2: The worst is over...

695 days ago by 47phord | 4 comments »

Okay, so I’ll start this post off by apologizing for not documenting my progress better but I get so wrapped up in working that I forget to stop and take pictures. But I digress. First off, I added a couple dividers in the cabinet made from my trusty CDX stash: Then on the left side I added some oak rails for drawers: Here is a shot of lower drawer I built. Nothing fancy, just scrap 3/4 oak ply for the sides-butt joints with glue and brads to hold it together-and 1/4 plywood bo...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase