Router Table on the Cheap #2: The worst is over...
Okay, so I’ll start this post off by apologizing for not documenting my progress better but I get so wrapped up in working that I forget to stop and take pictures. But I digress. First off, I added a couple dividers in the cabinet made fro...
791 reads | 4 comments | Continue reading »
6 comments so far
a1Jim
home | projects | blog
86995 posts in 1744 days
#1 posted 404 days ago
Welcome to Ljs a world wide community were there are great people,super projects and great woodworkers.Enjoy
-- W James Brokenbourgh Custom furniture maker http://artisticwoodstudio.com/
Gabe C.
home | projects | blog
288 posts in 508 days
#2 posted 404 days ago
Welcome to Lumberjocks! Be careful, this site can make you spend too much time in the shop!
-- If I could just get this whole "Time/Money" problem figured out...
SnowyRiver
home | projects | blog
45638 posts in 1647 days
#3 posted 404 days ago
Welcome aboard. Nice that you could join us on Lumberjocks.
-- Wayne - Plymouth MN
Max
home | projects | blog
55745 posts in 2440 days
#4 posted 404 days ago
Glad to see that you have made LumberJocks a part of your Woodworking experience… Welcome
-- Max "Desperado", Salt Lake City, UT
surfin2
home | projects | blog
40862 posts in 1302 days
#5 posted 401 days ago
Welcome To LumberJocks.
Good Luck…
-- Rick
rodman40
home | projects | blog
147 posts in 494 days
#6 posted 372 days ago
Great looking Ford,I had a 48 that ate clutches on several occasions, man could that baby move!!!
-- Rodman
Have your say...