LumberJocks

Al Breit's Blog

  • Advertise with us
This blog is written by Al Breit | 1 entry so far

Latest Entry

Router table upgrade

01-03-2018 01:35 AM by Al Breit | 2 comments »

I just took my Kreg router table enclosed the router motor for better dust collection and added drawers for storage of router bits. I bent up an aluminum box to enclose the router with a 4” dust port. Added some extra holes for locking the spindle and a brass bar for locking the spindle height after adjustments. For the brass bar I cut a slot just big enough to allow the bar to fit through and a simple heavy duty rubber band to keep the lock leave upright. My Tryton router had it builtin lift so locking the spindle and locking the lift became a challenge. I used a dowel cut at a 45 to access the spindle lock and a brass rod to canter the lock on the lift on & off. The dust colle...

Read this entry »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com